PLEASURE ZONE DJ SERVICES -230v SWITCHMODE AMPLIFIERS
Mobile 022 085 2106 -
Phone 03 967 9711

Please note:
All prices include Gst.
INSTRUMENT AMPLIFIER
EPM1050s; $1899.00
epm1050s (76K)

Mixer / Amplifier with Studio Quality Effects for
Bands and Gyms etc. High quality mixing and or amplification at a reasonable price! 2 x 250W Rms at 4 ohms. Ten input channels with 7 ch Graphic EQ. Studio quality effects section, speakon output. Wood and steel double cases -> rack mountable. +48V Phantom Power.
bank deposit (4K)


AUDIO CENTER POWER AMPLIFIERS

For full specifiations VA AMPLIFIER SPECIFICATIONS

va 401 power amplifier $995.00

2 x 400W @ 8 ohms,
2 x 800W @ 2 ohm (VA401)
Class AB amplifier,
stable at 2 ohms,
Hi-fi Sound Quality.
va 401 amp (168K)
Va 401 amplifier specifications and pdf

VA Series Power Amplifiers are professional, high-end amplifiers. They give you stability, reliability and top performance - right down to 2ohm loads, at a very competitive price and a 2U package. The two models we have in this series range from 800 watts to 2500 watts per channel at 2 ohms to satisfy all requirements. The elegant LCD on the VA front panel shows you which mode the amp is set to, temperature, direct current protection and overload protection status.

Massive R+D effort went into VA, particularly the VA1201 with new Class H+ output topology which eliminates cross switching distortion commonly found in other Class H designs. Carefully selected components such as audiophile grade Wima capacitors our VA Series has a Hi-Fi sound and high damping factormaking it suitable for any application from high power subwoofers to critical monitoring where performance, quality and reliability are mandatory.

A-Guard is AUDIOCENTER's comprehensive protection system. Unlike other solutions which depend on separate circuits to address different problems, A-Guard was developed as centralized solution where all protection requirements work together in perfect harmony. A-Guard is only applied when it's necessary to protect the amplifier. This is why VA amplifiers are able to sustain full power output even under complex capacitive loads.

These amplifiers give you excellent sound quality and performance - the VA Series reliability is the result of clever and innovative circuit design and robust mechanical structure. Even under difficult 2ohm loads or complex capacitive loads these power amplifiers stand up as being among some of the best in the world.

VA401 SPECIFICATIONS
Sensitivity:0.775V/32dB/26dB
Filter capacitor capacity:10000f/50V4
Damping factor:=350
Slew rate:=25V/s
Dimensions 48388456mm
Weight 18kg
Output Stage Circuit: Class A/B
Damping factor(1kH@8OHMN) >350
Input Connectors Jack & NEUTRIK Male XLR
Output connectors NEUTRIK Speakon 4P & Binding post
Power consumption (Dual channel driven4OHMN, 1/8RMS/230V) 3.1A
Rated power (20~20kHz =0.1%THD)
4O bridge 1600W
8O bridge 1200W
2O stereo 2800W
4O stereo 2600W
8O stereo 2400W
Frequency Response (1W 8O stereo) 20Hz~20KHz(0.5dB)

12 months warranty
bank deposit (4K)


va 1201 power amplifier $1999.00

2 x 1200W @ 8ohms,
2 x 2500W @ 2ohms (VA1201)
Class H+ amplifier,
stable at 2 ohms,
Hi-fi Sound Quality
va 1201 amp (159K)
Va 401 amplifier specifications and pdf

A Series Power Amplifiers are professional, high-end amplifiers.
They give you stability, reliability and top performance - right down to 2ohm loads, at a very competitive price. The VA1201 performs impressively - you get a whopping 2500 watts per channel at 2 ohms which should satisfy most requirements.

The elegant LCD on the VA 1201 front panel shows you which mode the amp is set to, and displays temperature, direct current protection and overload protection status. Massive R+D effort went into the VA1201 with new Class H+ output topology which eliminates cross switching distortion commonly found in other Class H designs. Carefully selected components such as audiophile grade Wima capacitors our VA Series has a Hi-Fi sound and high damping factor making it suitable for any application from high powered subwoofers to critical monitoring where performance, quality and reliability are mandatory.

A-Guard is AUDIOCENTER's comprehensive protection system which is also built into this amplifier. Unlike other solutions which depend on separate circuits to address different problems, A-Guard was developed as centralized solution where all protection requirements work together in perfect harmony. A-Guard is only applied when it's necessary to protect the amplifier which is one reason why VA amplifiers are able to sustain full power output even under complex capacitive loads.

These amplifiers give you excellent sound quality and performance - the VA Series is the result of clever and innovative circuit design and robust mechanical structure. Even under difficult 2ohm loads or complex capacitive loads these power amplifiers stand up as being among some of the best in the world.

VA1201 SPECIFICATIONS
Sensitivity:0.775V/36dB/32dB
Filter capacitor capacity:6800f/100V12
Damping factor:=650
Slew rate:=25V/s
Dimensions 483132506mm (3U)
Weight 40kg
Output Stage Circuit: Class H+
Damping factor(1kHz @ 8 ohmn) >650
Input Connectors Jack & NEUTRIK Male XLR
Output connectors NEUTRIK Speakon 4P + Binding post
Power consumption
(Dual channel driven 4ohmn, 1/8RMS/230V) 5A
Rated power (20~20kHz =0.1%THD)
4O bridge 5400W
8O bridge 3600W
2O stereo 22500W
4O stereo 21800W
8O stereo 21200W
Frequency Response (1W 8ohmn stereo) 20Hz~20KHz(0.5dB)

12 months warranty
bank deposit (4K)


OUR PUBLIC AUCTION / TRADING / SELLING SITE LISTINGS HERE;
TRADE ME- SOUND AND EFFECTS PRODUCTS
TRADE ME- RGB- LED LIGHTING

home page (2K)


EMAIL -- geoffrey_pzdj@paradise.net.nz - Phone 03 967 9711 -Mobile - 022 085 2106 -EMAIL -- PZDJ SERVICES
Facebook Link: